Shop SMD2835 Indoor Light Suspended LED Linear Light 240 Volt 220Volt IP20 30 Degree
Details:
| Color Temperature(CCT) | 3000K/4000K/5700K selectable |
| UGR | 19 |
| Luminous Flux | 3000lm |
| Warranty | 3-years |
| LED Driver | Lifud |
Descriptions:
1. Integral emergency, DALI, and 0-10V dimmable and corner, cross, and T connectors available as added extras.
2. Integrated packaging LED source has a dedicated heat dissipation system, high quality LED driver, and long lifespan.
3. The aluminum shell of the LED can increase the life of the wick and make the LED lamp look beautiful.
4. There is no ultraviolet or infrared in the spectrum, no heat, no radiation, and little glare.
5. The waste can be recycled without pollution and without mercury.
LED line lamp series aluminum lamp body, compact lightweight end cover, and mounting bracket by aluminum alloy high-pressure die-cast high-temperature resistant silicone rubber sealing ring, to ensure the reliability of waterproof. Lamps can be installed in single or multiple combinations. Apply to all kinds of buildings, indoor local or contour lighting.
Our Quality Guarantee:
Perfect testing equipment to ensure that the product meets the standard.
All products are manufactured according to CE, SAA, RoHS certified.
Applications:
LED Linear Light widely used in many indoor, such as office, hospital, school, store and another place.
Attention:
1. Anti-static:
because LED is an electrostatic-sensitive element, if the maintenance of an LED engineering line lamp does not do a good job in anti-static measures, it will burn out the LED, resulting in waste. What needs to be noted here is that the soldering iron must be used as an anti-static soldering iron, at the same time the maintenance personnel must also do a good job in anti-static measures.
2. Continuous high temperature:
the two important components of led engineering line lamp led and FPC, are not sustainable high-temperature resistant products. If the FPC continues to be at high temperature or exceeds its bearing temperature, it will cause the FPC's covering film to bubble and directly cause the led project line lamp to be scrapped. At the same time, LED can not endure high temperature for a long time under high temperature, its chip will be burned out by high temperature. Therefore, the maintenance of the led engineering line lamp used by the soldering iron must be used to control the temperature of the soldering iron, the temperature is limited to a range, prohibit random change and setting. In addition, even so, it should be noted that during maintenance, the soldering iron should not stay at the foot of the LED for more than 10 seconds, if this time is exceeded, it is likely to burn out the LED chip.
Product Tags:
|
|
Shop SMD2835 Indoor Light Suspended LED Linear Light 240 Volt 220Volt IP20 30 Degree Images
|
